Fit & Measurement

Watch Strap Length: What 110/70 and 115/75 Mean, and How to Choose Your Size

Drawing: a watch strap closed in a loop, buckle on a middle hole

Lug width decides whether a strap fits your watch. Length decides whether it fits you. A strap that is too short closes on the last hole and pulls the buckle off-centre; one that is too long leaves a tail that will not stay in the keepers. The right length closes on a middle hole, keeps the buckle under your wrist, and is then forgotten.

This guide explains what the numbers on a strap mean, which size suits which wrist, and the simplest ways to choose.

What 110/70 or 115/75 means

A watch strap is made of two separate pieces, and its length is written as two numbers in millimetres.

  • The first number is the long side. This is the piece with the holes and the pointed tip. It attaches at the bottom of the case, at 6 o'clock.
  • The second number is the short side. This is the piece that carries the buckle. It attaches at the top of the case, at 12 o'clock.

So a 115/75 strap has a long side of 115 mm and a short side of 75 mm. Each is measured from the end that meets the watch case; the buckle itself is not included.

Handmade light blue goat leather watch strap laid flat, showing the long side with holes and the short side with the buckle
The long side with its holes, and the short side with the buckle.

The watch is not part of the measurement. The case sits between the two pieces, so the same strap wears longer on a large watch than on a small one.

Drawing: strap length 120/80, long piece 120 mm and buckle piece 80 mm
A 120/80 strap: 120 mm on the long side with the holes, 80 mm on the buckle side.

Which size for which wrist

For watches with ordinary lugs and a pin buckle, these are the sizes in the configurator:

Size Long side Short side Wrist circumference
XS 100 mm 60 mm up to 15 cm
S 110 mm 70 mm 15–16.5 cm
M 115 mm 75 mm 16.5–18 cm
L 120 mm 80 mm 18–19.5 cm
XL 125 mm 85 mm 19.5–21 cm
XXL 130 mm 90 mm 21 cm and above

The wrist column is a general guide for choosing a size. If you are between two sizes, choose the larger one. If you are unsure, send me your wrist circumference and your watch model and we will settle the size together.

Drawing: wrist circumference from 14 to 22 cm with the strap sizes XS 100/60 to XXL 130/90
Wrist circumference in centimetres, and the strap size for it.

Why the table is only a starting point

Size letters are convenient, but three things move the right length for the same wrist.

  • The watch. The case sits between the two sides of the strap. A long case, or one with long lugs, takes up more of your wrist, so each side of the strap can be shorter. A small watch needs more strap.
  • The shape of your wrist. Two wrists with the same circumference can be flat and wide or round and narrow. That changes where the buckle ends up.
  • How you wear it. Some people like a watch close; others like it to move. A few millimetres either way is a matter of preference, not error.

The simplest way: measure a strap you like

If you already own a strap that fits this watch well, its length is the best information you can give me.

  1. Take the strap off, or leave it on and lay the watch flat.
  2. Measure the long side from the end at the case to the tip.
  3. Measure the short side from the end at the case to the point where the leather folds around the buckle. Do not include the buckle itself.
  4. Note which hole you normally use.

If you close the strap on a middle hole, order the same length. If you are on the last hole, go one size longer; on the first hole, one size shorter.

Drawing: a watch strap closed on the middle hole
The right length closes on a middle hole.

If you have no strap to measure

Wrap a soft tape measure around your wrist where you wear your watch, snug but not tight. A strip of paper marked with a pen and laid against a ruler works as well. Find that figure in the table above, or send it to me with your watch model and I will recommend a length.

The guide to measuring your wrist shows both ways step by step.

Ask the atelier →

When both numbers are the same: 115/115, 120/120, 125/125

A size with two equal numbers is a different kind of strap. It is made for a butterfly clasp, a folding clasp that sits in the middle of the strap and opens on both sides. Because the clasp is in the centre, both pieces of leather are the same length, and there is no row of buckle holes.

The Cartier Santos 100 is the clearest example: its straps come in 115/115, 120/120 and 125/125 mm. The Santos 100 strap guide explains that construction.

A single deployant clasp is different again: it uses a strap with a long and a short side, like a pin buckle strap, and the clasp adds some length of its own. Do not choose an equal-sided size for a pin buckle, or a long/short size for a butterfly clasp. They are not interchangeable. For equal-sided sizes, please send me your wrist circumference; the wrist table above does not apply to them.

Sizes by watch

Not every watch is offered in every size, because the right lengths depend on the case and the clasp. These are the sizes for the models I make straps for most often:

Watch Sizes offered
Cartier Santos (QuickSwitch) 115/75, 120/80 (the Cartier standard), 125/85; 120/120 for a butterfly clasp
Cartier Santos 100 115/115, 120/120, 125/125
Cartier Santos-Dumont 105/65, 115/75, 120/80, 125/85
Cartier Tank 100/60 to 130/90, and 110/110
Citizen Zenshin 100/60 to 130/90

Each product page shows the sizes for that model. If the length you need is not listed, it can be made: every strap is cut to order.

Where the buckle should sit

When the length is right, three things are true: the watch sits in the middle of the top of your wrist, the buckle sits roughly opposite it underneath, and the tip of the long side reaches through both keepers without overshooting. If the buckle is pulled towards one side of your wrist, the short side is the wrong length for you, even if the strap closes.

Bespoke proportions

Because every strap is made to order, the length is not limited to the sizes above. If you are between two sizes, or need a shorter buckle side with a longer hole side, tell me and I will cut it that way. Thickness and width at the buckle are set for the watch at the same time; the watch strap sizing guide lists them by model, and the guide to measuring lug width covers the other end of the strap.

Quick reference

Question Answer
What does 115/75 mean? Long side 115 mm, short side 75 mm.
Which side has the holes? The long side (the first number).
Is the buckle included in the length? No.
Which size for a 17 cm wrist? M (115/75) as a general guide.
What if I am between two sizes? Choose the larger one.
What does 120/120 mean? Two equal halves, made for a butterfly clasp.
What if my size is not listed? Write to me. Straps are made to order.

Create your bespoke strap →

Featured

Explore related straps

Continue reading

Back to The Journal